| Technical Specifications |
Actuator Data |
| Input Signal |
Changeover Contactors |
| Stroke Angle ( Deg ) |
30 - 270 |
| Torque Rating ( MKg ) |
01 - 15 |
| Operating time ( Secs.) |
30 for 90 Deg |
| Handwheel |
Provided For Manual Operation In Case Of Power Failure |
| Enclosure |
Weatherproof |
| Degree of Protection |
IP - 55 Confirm To IS - 13947 / 1993 |
| Ambient Temp - Deg cen |
45 |
| Mounting |
Foot / Face |
|
|
Motor Data |
|
 |
| Type |
Induction, TEFC |
| Supply std |
230V., 1 Phase AC, 50 Hz |
| Optional |
110 V / 24 V., 1 Phase AC, 50 Hz |
| Frequency ( Hz ) std |
50 |
| Optional |
60 |
| Insulation class std |
B |
| Optional |
F |
| Duty std |
S1 |
| Optional |
S2 or S4 |
|
|
Model Specification |
| Model |
Torque |
| QTR - MN - B |
05 MKG |
| QTR - MN - C |
10 MKg |
| QTR - MN - D |
15 MKG |
|
|
Accessories |
| i) Standard |
* Travel Limit Switches
( 1 changeover contacts ) -2 nos
* Torque Limit Switches
(1 No + 1Nc) - 2nos. |
| ii) Optional |
* Angle Transducers : out put :
150 ohms / 500 ohms / 1 Kohms |
|
* Remote Position Indicator |
|
* Controller Box with Digital % Position Indicator input
:- 4-20mA/0-10VDC. output :- up/down relay |
|
* Mounting Bracket & Couplings for Ball & Butterfly Valves |
|
|
General Specifications |
| Casing |
Cast Aluminum Powder Coated / Painted |
| Shaft Covers |
Cast Iron Powder Coated |
| Worm Shafts |
EN-8 Plated |
| Worn Gears |
Phosper Bronze |
| Output Sharft |
Stainless Steel 410 |
| Bearings |
Tapper Roller |
| Hand Wheel |
Mild Steel |
| |
